Connections - Corporate Network


You can connect iGuard FPS110 directly to your corporate computer network via standard RJ-45 cabling & TCP/IP protocols. By connecting it to the network, you can manage & monitor the unit via any standard web browser, such as Microsoft Internet Explorer & Netscape Navigator.


The connection is very straightforward as shown in the following picture:



Power-up


After the powering up, iGuard will perform a self-test, then it will enter the standby mode as shown below: -


Description

LCD Display

  1. Power Up -- when iGuard is power-up, it will perform a self-test…


Initializing... 


  1. After about 10 sec., the device will load the system program…

 iGuard System Loading... 


  1. After loading the system program, iGuard will enter the standby mode and is now ready to use.

 Monday 30 13:49 ID#: