Setting the date and time

You need to enter the date and time so that iGuard can time stamp all the access & time attendance records. Follow these steps to set the system date and time: -

Description

LCD Display

  • While in Standby Mode, press the Func key to enter the Setup Menu. You will be prompted to enter the Administrator Password as shown.

Enter Password: _


  • Enter the Administrator Password (default:. 123).

Enter Password: 123


  • Press the Func key to continue. The setup menu will scroll down slowly as shown.

Press 1: Add/Update ID

:

:

Press 5: System Configuration..


  • Enter 5 to select the System Configuration menu. The current date is displayed. If necessary, enter the new date and then press the Func key to continue.

Date (M/D/Y): 08/30/1999


  • After pressing the Func key, the current time is displayed. Enter the new time then press the Func key to continue.

Time (H:M:S):

13:45:23


  • The system will then ask for the Terminal ID. The Terminal ID is used to identify the iGuard in your network, especially if you have installed more than one (to be continued in the next section).

Terminal ID:


Note:

iGuard can keep the date & time running without power for approximately two days. Also, there is a software tool for users to synchronize the clock of the iGuard device with the desktop PC (iSetClock.exe), which can be downloaded freely at the website.