Verification with Fingerprint

The device uses the enrolled fingerprint information to identify the person. The verification process is very straightforward, and is illustrated in the following steps: -

Description

LCD Display

  • While in the standby mode, key in the user ID number (e.g., A01).

Mon Aug 30 13:49 A01_

  • Lift the shutter and place either your primary finger (right-hand thumb) or your secondary finger (left-hand thumb) on the sensor. You should place the finger the same way as you did during the enrollment procedure. The device will automatically start scanning when the sensor shutter is lifted all the way up.

Scanning... A01_

:

:

Verifying...

  • If you are authenticated, the device will open the door, and will return to the standby mode.

A01 Authorized!

:

:

Mon Aug 30 13:49 ID #:_

Note: there is another feature called Auto-Match, which allows the user to access the device without the need to enter his/her ID first.