Registering an existing Smart Card

The first time a user accesses a remote unit in a remote branch with this smart card, the user must register the Card to this unit. In addition, after registering the system administrator must also assign the departments the user belongs to, to grant the user the access rights required. After that, the user can use his/her card to access the remote unit same as the one in his/her own branch.

The registration procedure reads the user information from the Smart Card, and stores the information in the Smart Card Memory of the internal user database.

The procedure is done via the Function 0 in the Setup menu, and is illustrated in the following steps:-

Description

LCD Display

  • While in the standby mode, press the Func key to enter the Setup Menu. Enter the Administrator Password (default 123) and press Func key, then press 9 to select “Issue/import Card" menu. Press 2 to import Smart Card.

Enter ID #: _


  • You will then be asked to present the Smart Card.

Waiting for SmartCard...

  • Present a Smart Card near the keypad. The unit will then write the user information to the card.

Writing....