Enrollment with Smart Card (for Models with Smart Card reader)

The user has to be created prior to use this function either the fingerprint is enrolled or the password is added. After the enrollment procedure, the user ID and the fingerprint template is stored in the internal memory.

Please note that only one (the primary ) fingerprint template is stored on the smart card.

The following steps illustrate how to write the user information to a Smart Card:-

Description

LCD Display

  • While in the standby mode, press the Func key to enter the Setup Menu. Enter the Administrator Password (default 123) and press Func key, then press 9 to select “Issue/Import Card" menu. Press 1 to issue Smart Card.

Enter ID #: _

  • Enter the ID # you want to write to the Smart Card (e.g., A01).

Enter ID #: A01_

  • Press the Func key to confirm. You will then be asked to present the Smart Card.

Waiting for SmartCard...

  • Present a Smart Card near the keypad. The unit will then write the user information to the card.

Writing....

  • After writing to the card, you will be asked whether or not to remove the user's fingerprint information from the internal memory. It is recommended not to remove user fingerprint information from memory.

Remove Finger print Yes(1)/No(2)?

  • The unit will prompt for another ID.

Enter ID #: _

  • Press <-- key once or wait till time out, the unit will return to the standby mode.

Mon Aug 30 12:00 ID #:_

Please note that the above procedure will overwrite all the existing information stored in the Smart Card.