Enabling Automatch

This feature enables the device to identify a person without requiring the user to first enter his/her user ID, and must be turn on via the Internet browser, as described in the next section. All that needs to be done is to present your enrolled finger to the sensor and wait for it to match your fingerprint template with stored templates. Once a match is made, the door opens and the system will then return to the standby mode.

The maximum number of users allowed to access the iGuard using automatch is recommended to be limited to 30 users. This is due to the fact that the iGuard would require some time to process the fingerprint and then search for it across ALL the database stored on your iGuard. It is therefore recommended that the automatch feature is left for top management and the rest of staff can use ID plus Fingerprint for access. Also, user with poor fingerprint quality shall not use automatch.

Description	LCD Display
While in the standby mode, press the Func key to enter the Setup Menu. Enter the Administrator Password (default 123) and press Func key, then press 8 to select "Toggle Automatch ID" menu.	Enter ID #: _
Enter the ID # you want to enable automatch (e.g., A01). Then, press the Func key to confirm.	Enter ID #: A01_