Test Mode
Under normal operation, iGuard records all the user transactions in its Access Log. However, you can set the machine to Test Mode, and it will temporary disable the machine from recording the transactions. This feature is useful when you have finished a new enrollment for a new user, and you want the new user to practice with the device.
You use "Function A" in the setup menu to toggle between Test Mode and Normal Mode, and is illustrated in the following steps:
|
Description |
LCD Display |
|
While in Standby Mode, press the Func key to enter the Setup Menu. You will be prompted to enter the Administrator Password (default: 123) as shown.
|
Enter
Password: _ |
|
Press the Func key, then press "A" to toggle the machine to Test Mode. The Display will show the Test Mode status as shown. You can now ask the new users to practice with the machine, and the transactions will not be recorded.
|
== Test Mode! == ID #:_
|
|
Following the same procedure above and press "A” again in the setup menu to put the machine back to Normal Mode. |
Mon 30 Dec 13:49 ID #:_
|
|
|
|
Note:
Please note that you must change the machine back to Normal Mode, or else the records in the access log will become invalid.